Best Motor Oils

SaveSavedRemoved 0
Deal Score0
Deal Score0

Shopping for engine oil can be daunting, with numerous brands and options available in today’s marketplace. How do you choose from all the different companies offering motor oil when they all sound the same? Well, truth be told, most reputable brands will offer similar products, and in the case of this top 10 list, you really can’t go wrong with any of the options. Some oils are better quality than others, offering more performance and working harder to keep your engine clean. But many would argue that the general consumer won’t even notice the difference between Quaker State or Pennzoil. In fact, there have been studies conducted that show most oil brands have similar products.

In this article, we’ll take a look at the top 10 best motor coils available—but only conventional motor oils. If you’re searching for the best synthetic motor oils, click here. Conventional motor oil is generally the most affordable engine oil you can purchase and offers basic protection for most engines. Generally, the majority of automakers will use conventional motor oil in a vehicle when it rolls off the assembly line for the break-in period, at which point, some owners will upgrade to semi-synthetic or fully synthetic oil. But for most ordinary drivers, conventional motor oil is sufficient in maintaining your engine’s performance and life.

Where the performance of conventional motor oils suffer compared to synthetic oils is in extreme temperatures, and you’ll need to do more frequent oil changes. Ever heard that your car’s oil should be changed every 3,000 miles? That’s likely because it uses conventional motor oil.

We’ll detail more information you need to know about conventional motor oil after our product suggestions. For more information on the top 10 best motor oils, refer to our table of contents.

Added to wishlistRemoved from wishlist 0
Add to compare

STP Motor Oil

Added to wishlistRemoved from wishlist 0
Add to compare

Formula Shell Motor Oil

Added to wishlistRemoved from wishlist 0
Add to compare

Lucas Oil Hot Rod & Classic Motor Oil

Added to wishlistRemoved from wishlist 0
Add to compare

Pennzoil Motor Oil

Added to wishlistRemoved from wishlist 0
Add to compare

Havoline Motor Oil

Added to wishlistRemoved from wishlist 0
Add to compare

Quaker State Advanced Durability Motor Oil

Added to wishlistRemoved from wishlist 0
Add to compare

Valvoline Daily Protection Motor Oil

Added to wishlistRemoved from wishlist 0
Add to compare

Editor’s Pick: Castrol GTX Motor Oil

Why is Motor Oil Important?

Unless you own an electric vehicle, your car’s engine needs oil. Its main and most important function is to prevent friction inside your engine, since it’s full of moving parts. Motor oil is essential to keep these parts lubricated so they work as efficiently as they were designed to function. And where there’s friction, there’s heat—which is also bad for an engine. Ever heard of overheating or even frying an engine? That’s because the oil—of lack of it—wasn’t doing its job.

In addition to preventing friction and heat buildup within your engine, quality motor oil will keep your engine clean by preventing rust, corrosion, and oxidation.

What are all these Numbers and Letters?

When you’re shopping for motor oil, you’ll notice they’re offered in different viscosities, which by definition is “a quantity expressing the magnitude of internal friction, as measured by the force per unit area resisting a flow in which parallel layers unit distance apart have unit speed relative to one another.” That probably just made it more confusing.

Simply put, motor oils have an SAE (Society of Automotive Engineers) rating that explains the viscosity of the engine oil—how thin or thick it is. So let’s breakdown what the SAE rating actually means.

Let’s start by looking at a popular oil choice, 10W-30. The first set of numbers and letters (10W), means that particular oil has a viscosity grade of 10 when tested at colder temperatures. The “W” standards for winter. The following number after the dash is the viscosity grade of the oil when an engine’s temperature is at 212ºF. If you live in an area that doesn’t have extremely cold temperatures, you may not care about your oil’s performance in the cold. And that’s where oils that just say SAE 30 or SAE 50 come into play. Those oils have not been tested in cold temperatures.

If you do live in an area that experiences cold temperatures, you’ll want an engine oil with low W viscosity. Low viscosity oil is recommended for cold starts, since the oil is thinner and can flow quicker through your engine.

How to Change Your Car’s Engine Oil: a Breakdown by Kshitij Sharma

Alright, so social distancing in is full swing and you are doing your part to help the world recover from this crisis. Just before this all went down though, you were scheduled in for an oil change. And that is driving you a little crazy, because you love your car. Every drive you take, no matter how short, you’re worried about damaging the engine since you couldn’t change the engine oil.

But don’t worry, we have you covered. Changing your car’s engine oil is far from a daunting task. It is quite simple and doesn’t take too long either. You do need to be careful and follow a procedure though—mostly to avoid making a mess.

Before you begin, however, you will need to check which engine oil the manufacturer recommends. The information is usually given in the owner’s manual. If you already have the recommended engine oil, let’s begin.

Tools Required

 

Changing the engine oil is one of simplest processes when it comes to working on cars. If you want to start working on cars, changing the oil yourself is a good place to start.

You will need an oil pan, a socket wrench, latex gloves and a filter wrench. Though in some cases you can remove the filter by hand or by other hacks, we highly recommend you invest in the right tool. As for the socket wrench, the ⅜-inch is the most common size for the drain plug, though sizes can run between ¼-inch and ¾-inch.

Also, make sure you have the right oil filter for your car. The spin-on type is the most common oil filter. Plus, the location of the oil filter is given in the owner’s manual.

The Procedure

There are two ways to go about changing the engine oil: the warm method and the cool method. The warm method is the more recommended one. You drive your car around the block a couple of times until the engine reaches the optimal temperature. Then park it on a level surface and let it cool for 10 to 15 minutes. This method thins the oil down so the flow is more uniform and the oil also gathers up all the minute impurities and debris them might be in the engine at the time.

The cool method is the one we recommend and is especially useful for old cars. It also beneficial as the car is not driven there is no leftover pressure between the filter and the sump so the flow is more controllable. And if it’s an old car, it is a great way to check for coolant leaks as well.

First, start off by parking your car on level ground. The sump is always tilted towards the drain plug to aid oil removal so you don’t need to place the car on a jack.

Next, place the oil pan underneath the drain plug. Make sure it is slightly off-center.

Undo the drain plug. If you are doing the cool method, get a small glass jar and let the initial oil drain into the jar. That way you can test if the coolant is leaking into the engine. The anti-freeze and water are typically heavier than oil and will settle at the drain plug and will drain out first.

Next, let the oil drain and get yourself a cup of coffee.

By the time you’re done with your coffee, the oil should’ve drained completely. The next step is to remove the oil filter.

Make sure you have ample grip and the wrench is snug before you turn it anti-clockwise to loosen the air filter. The oil will splash out so be prepared. And if you used the warm-up method, then the splash could be a bit more aggressive compared to the cold method.

Next, oil the seal of the new filter liberally with the new oil before screwing it back in. After the oil filter is in give it just a ¾ twist to tighten it. Do not over-tighten so you can easily remove it during the next oil change. Screw the drain plug back as well and follow the same procedure as the oil filter.

Now the final step, adding the oil into the engine. Pour about half in to the engine and then switch the car on for about five minutes. This helps the oil spread around and avoid overflow. Next pour in the rest, close the oil filler cap and you’re done.

Finally, it is advisable that you drive the car for about 10 minutes before letting it rest for the rest of the day. Have fun.

We will be happy to hear your thoughts

Leave a reply

Subscribe to our list

Don't worry, we don't spam

How to add Email box
Enable registration in settings - general
Compare items
  • Total (0)
Compare